A Foxee Dog SBS was requested by a couple people. While at this time I don't have a recipe for the Foxee Dog, it looks much like a Temple Dog originated by Hakan Norling. I surmize the only differences between a Temple Dog and Foxee Dog is that the Foxee Dog is tied on a hook vice tube and uses Artic Fox vice Temple Dog. Since I had neither Temple Dog or Artic Fox, I tied this pattern with Finn Raccoon and was quite pleased with the results. Recipe: Main Hook: TMC 7999, Daiichi 2161, Mustad 36890, or Gamakatsu T10-6H #6 Stinger Hook: Gamakatsu Octopus Circle #4 with 20 lb Fireline Thread: Orange Uni 6/0 Tail: Orange Finn Raccoon Body: Orange Flat Diamond Braid, Orange Hackle Rib: Black Ultra Wire Medium First Wing: Flashabou, Orange Finn Raccoon, Black/Cree Hackle Second Wing: Orange Finn Raccoon, Black/Cree Hackle Third Wing: Black Krystal Flash, 3D EP Fibers Black, Black/Cree Hackle Tie in your stinger hook using FireLine, Mono, or Beadalon. Wrap on top of the hook. Feed the tag ends thru the eye of the hook. Pull back down the sides and lash down. For extra strength, coat with superglue. This is especially important if you don't feed your tag ends thru the eye of the hook. Tie in the Finn Raccoon tips forward. Make the tips as long as the hook shank. Cut tag end. Fold the tips back and tie off. Add some black wire and flat braid. Advance your thread to the two-thirds point on the hook. Wrap the braid forward with overlapping turns and tie off. Tie in a orange hackle. Wrap the hackle to the back of the hook and tie off with the wire. Wrap the wire forward and tie off. Add three strands of Flashabou (I used Gold here), double around the thread and tie off. Trim to length of tail. Add in the first wing of orange Finn Raccoon, tips forward. When preparing the Finn Raccoon leave some of the longer guard hairs. Fold half of the hair back and tie off. Fold the second half of hair over the first.