Plans for the Port Ludlow pram

Discussion in 'Fly Fishing Forum' started by IveofIone, Mar 9, 2009.

  1. IveofIone

    IveofIone Active Member

    Joined:
    Sep 23, 2003
    Messages:
    3,468
    Likes Received:
    1,705
    Location:
    .
    A few years back I helped a guy unload one of these prams over in the Okonogan. I was impressed with the design at the time and tried to get a copy of the plans. All the leads I got were dead ends and I still don't know if the plans are even available to anyone outside of the club.

    Does anyone have a copy of those plans they could send me? I have been upgrading some of my woodworking tools lately and would like to apply their spiffyness to a new pram.

    Thanks, Ive
     
  2. kosel80

    kosel80 Native Trout Fan

    Joined:
    Dec 11, 2007
    Messages:
    246
    Likes Received:
    0
    Location:
    Hampton Roads Virginia
    Ive, I may sound like a rookie for asking this but what is a Port Ludlow pram? The only reason I ask is when I was a kid growing up in PL my neighbor built small prams once in a while....and one giant catamaran the size of my house. Just wondering if it was his design.
     
  3. IveofIone

    IveofIone Active Member

    Joined:
    Sep 23, 2003
    Messages:
    3,468
    Likes Received:
    1,705
    Location:
    .
    My nomenclature may be wrong but my understanding was that the Port Ludlow Fly Club had built a series of prams as kind of a club function. The design was simple but elegant in it's simplicity. I have wanted to get that plan for several years and do my own take on it. At this point I don't even have a picture but would happily pay for a set of plans.

    If I am completely wrong about this and it is some other fly club please let me know or direct me in a better direction. More new tools arrived today-I'm ready to build!

    Ive
     
  4. Ed Call

    Ed Call Mumbling Moderator Staff Member

    Joined:
    Jun 9, 2008
    Messages:
    17,953
    Likes Received:
    2,258
    Location:
    Kitsap Peninsula
    I believe that Ive is right. There are some members of the PLFF club here, maybe one of them can put some direction toward who might be the pram craftsman. I've seen a couple of the prams, the first I had seen of this type of craft. Pretty large fellas fishing out of them standing up, very small craft but strangely stable.
     
  5. Steve Kokita

    Steve Kokita FISHON206

    Joined:
    Sep 28, 2008
    Messages:
    861
    Likes Received:
    367
    Location:
    Burien, Washington
    Hi Ive,

    Three years ago I built a small one-man pram. Check out Hannu's Boatyard on the web and the pram I built is called the Portuguese style 1 1/2 sheet pram. Pretty easy to build, weighs about 60 lbs and I can stand and cast. Take a look and see what you think.---Steve
     
  6. IveofIone

    IveofIone Active Member

    Joined:
    Sep 23, 2003
    Messages:
    3,468
    Likes Received:
    1,705
    Location:
    .
    Steve, Thanks for the tip, I checked out those plans and they are pretty good for free. The boat you built looks like it is only about 33'' wide at the widest point of the bottom. That seems a little narrow to me as I was looking for something about 9'' wider than that. I only weigh about 170# though so maybe it wouldn't be too tippy for me. It does look like a nice place to chironomid fish from-dry and wader-free!.

    Ive
     
  7. speyflyfisher

    speyflyfisher Member

    Joined:
    Feb 26, 2003
    Messages:
    141
    Likes Received:
    12
    Location:
    .
  8. hendersonbaylocal

    hendersonbaylocal Member

    Joined:
    Aug 29, 2005
    Messages:
    966
    Likes Received:
    0
    Location:
    Seattle WA
  9. nomlasder

    nomlasder Active Member

    Joined:
    Nov 30, 2003
    Messages:
    1,390
    Likes Received:
    161
    Location:
    Burien.
    Is this what you are looking for, or something a little larger
     

    Attached Files:

  10. Rob Ast

    Rob Ast Active Member

    Joined:
    Apr 18, 2005
    Messages:
    2,059
    Likes Received:
    400
    Location:
    West Pugetopolis WA
    Nomlasder - what are the specs on that boat? Looks like the rowing position is quite far back.
     
  11. Mike (Doc) LaCombe

    Mike (Doc) LaCombe Member

    Joined:
    Jul 15, 2007
    Messages:
    417
    Likes Received:
    10
    Location:
    Port Orchard, WA
    As it turns this is my craft built by Ross. It seems that the seat is located at the center of gravity for this boat. Now what I know is that I can sit my fat a-- in the seat and the boat seems to sit properly in the water. I don't have any pictures underway but I do have a couple comments about her trim from others in the water and it is reported she is fine. Since this picture I have added a small electric motor. Maybe she will plane when I test her. :)

    Mike
     
  12. islandfisherman

    islandfisherman islandfisherman

    Joined:
    Jun 13, 2005
    Messages:
    93
    Likes Received:
    0
    Location:
    Anacortes,Wa.
    Home Page:
    What a sweet little boat!!!,Please do post specs/info.Do you sell plans?...hope so...Thanks,Alan
     
  13. Mike (Doc) LaCombe

    Mike (Doc) LaCombe Member

    Joined:
    Jul 15, 2007
    Messages:
    417
    Likes Received:
    10
    Location:
    Port Orchard, WA
    I don't have any plans but you can contact Ross at www.wooddriftboat.com. He builds excellent boats. I have seen his drift boats also.

    Mike
     
  14. Arnie

    Arnie Let's go fly fishing!

    Joined:
    Jul 26, 2013
    Messages:
    16
    Likes Received:
    6
    Location:
    Port Ludlow,WA
    Hello Ive, If you are still interested (after all these years) in building one of these prams and want to talk to the fellow that designed them ...I'm your man. So far we have built 10 of these prams here in Port ludlow for our members. Sorry for the delay, I just joined the forum
     
  15. jwg

    jwg Active Member

    Joined:
    Aug 22, 2009
    Messages:
    915
    Likes Received:
    380
    Location:
    West Richland, WA
    Any pictures? The rest of us are curious.
    jay